Reverse Travel and Sag Indicator 2.0 Reverse

A well-tuned spring-loaded shock absorber should be soft, conform to the ground and provide the best possible grip. Unfortunately, many riders have never experienced the full potential of their spring shock due to the difficulty of adjusting it compared to an air shock. The stroke and sag indicator is a tuning tool that allows you to monitor the use of your shock before and during use to enable you to tune it optimally, using an external stem and O-ring to indicate the millimetres of stroke used during your session.
By using our online calculators, you can quickly determine the sag you're using and calculate the optimum sag. Using this information, you'll be able to accurately determine whether your configuration is good or needs adjusting (adjustment, spring).
The Travel and SAG indicator 2.0 is now available, with a new attachment system. It slips onto the ends of the spring and is now compatible with all spring-loaded shock absorbers, including less standard ones such as Cane Creek, Ohlins, Push Industries, DVO and more.
The indicator is mounted on the side of the shock, and the graduated stem allows you to easily read the travel used during your last ride.
It's an ideal tool for adjusting the sag, softness and preload of your shock.
Perfect for optimising the configuration of your new bike.

Main Features:

• Weight: 40 g (+/- 5% tolerance).
• Materials: Aluminium / plastic.
• Only compatible with springs under 180 mm.

Features:

• 1x upper spring plate.
• 1x lower spring plate.
• 1x indicator support.
• 1 telescopic handle.
• 1x graduated scale.
• 2x M3 screws.
• 2x M3 self-locking nut.
• 1x notched washer M5.
• 1x M5 screw.
• 1x O-ring.

MORE INFORMATION