Mahle Trio Remote Control Mahle

The Mahle Trio wireless remote control is a compact control solution designed for effortless use, offering intuitive access to key functions while keeping your hands on the handlebars. It allows you to adjust assistance levels, lighting, Walk Mode, and navigate the Head Unit + display menus. Powered by a replaceable CR1632 battery, it eliminates the need for wired connections for a clean, streamlined integration. With BLE connectivity, an LED status indicator, and an IP55 rating, it ensures reliable performance. Its universal compatibility allows it to fit all brake levers on the market, regardless of the components chosen by the original manufacturer.

Details:

• Compatibility: Head Unit + display (pairing maintained after battery replacement) and My SmartBike app
• Model: Trio Remote
• Connectivity: BLE (Bluetooth Low Energy)
• Power supply: 1 replaceable CR1632 button cell battery
• Protection rating: IP55 (water and dust resistant)
• Handlebar compatibility: Standard handlebars with a diameter of D = 22.2 mm at the grip area
• Mounting type: Open clamp with M3x8 DIN 912 hex screw
• Maximum tightening torque: 1 Nm (must be strictly observed to prevent damage)
• Dimensions: Width: 22 mm | Height: 43.9 mm
• Weight: 25 g
• Color: Black
• Supplier Part Number (SKU): 37034800000001
• EAN: 8435635899323
• Features:
  • Button 1: Short press: Increase assistance level | Long press: Turn lighting on/off
  • Button 2: Short press: Decrease assistance level | Long press: Activate Walk Assist mode
  • Button 3: Short press: Switch screens (HU+) | Long press: Trip reset
• LED charge status indicators (connection to HU+):
  • Over 80%: Flashing WHITE
  • Between 50% and 79%: Flashing GREEN
  • Between 20% and 49%: Flashing ORANGE
  • Less than 20%: Flashing RED (recommendation to replace the battery)
• Initial pairing procedure: Download the My SmartBike app. Press buttons 1 and 3 simultaneously for about 5 seconds. The LED flashes BLUE to indicate that the device is ready to connect. Follow the instructions in the app. The Trio controller turns off automatically when the Head Unit + is powered down.
• Battery replacement instructions: Remove the control from the handlebar, remove the rubber cover, unscrew the compartment screw (Torx M1.6), and carefully open the compartment without using a sharp tool to avoid damaging the tab. Insert the new battery, ensuring the O-ring is properly positioned to maintain the seal, then reassemble.

MORE INFORMATION